Landing an artificial lift job in Canada is quite easy if you’ve got the skills required.
In this article, we highlighted some important information to be abreast of when applying for artificial lift jobs in Canada. The work hours, salary, duties, and skills needed to secure an artificial lift job in Canada aren’t left out.
About Artificial Lift Jobs
To help pump oil to the surface, an artificial lift is done in oil wells to raising the pressure in the reservoir. The reservoir is naturally assumed to have adequate pressure to force oil to the surface, but occasionally the driving energy’s strength is insufficient, necessitating the use of an artificial lift.
There are some of these wells that don’t have enough pressure to pump oil naturally. Artificial lift is necessary to increase output because it is needed in at least 96% of oil wells in the United States.
Other times, oil wells that can pump oil to the surface lose their ability to do so over time, which takes us back to the need for artificial lifts. This indicates that each oil well uses an artificial lift to apply pressure at a specific moment in its production life.
Engineers of artificial lifts, lift service technicians, or escalator engineers are other titles for people who do these tasks.
Between 25,777 Canadian Dollars for entry-level positions to 54,268 Canadian Dollars for experienced artificial lift engineers, the average annual compensation for this type of work is expected to be in Canada. The workweek commitment for this employment is a minimum of 42 hours and a maximum of 44 hours.
You might put in shifts, and work on the weekends and holidays.
In addition to working in manufacturing, engineering construction, or safety inspection, engineers in the field of artificial lifts can also find work as independent contractors or as employees in other sectors.
Requirements for Artificial Lift Jobs in Canada
You could either have one or more of these requirements to be able to land an artificial lift job in Canada:
- A college course: Do a course that would put you through some of the skills and knowledge needed for the job. Important courses to take are:
- Level 3 Diploma in Maintenance Engineering Technology.
- Level 3 Diploma in Building Services Engineering.
- Level 4 Higher National Certificate in Lift Engineering.
- An apprenticeship.
- Train with a professional body.
Skills and knowledge required for an artificial lift job:
- Be able to fix machines
- Problem-solving skills
- Customer service skills.
- Be able to pay attention to details.
- Know building and construction.
- Know about public safety and security
- Persistence and determination.
- Be able to use a computer and software package effectively.
Duties of an artificial lift engineer:
- Determine issues and repair harm.
- Make a careful inspection.
- Take action in an emergency.
- Install lifts, lift wells, and lifting equipment.
- Show Clients how to use new equipment.
- Replace the lights, buttons, panel displays, floors, and interiors of the lifts.
- Refresh both the hardcopy and digital work records.
- Make sure the tools are in excellent condition and secure for use.
- Offer risk analysis, legal, and insurance advice.
- Be in charge of artificial lift system field optimization.
- Investigate repetitive errors.
- Create tactics for the entire field to avoid downtime.
- Participate in every vendor RCFA for ESPs, rod pumps, and gas lifts.
Methods for Artificial Lifting
Artificial lifting can be done primarily using two methods, which are as follows:
Beam Pumping
This method necessitates the placement of equipment both above and below the surface to increase surface pressure and induce oil to rise to the surface. Beam pumps are comparable to the most common artificial lift technique used on oil wells, using a sucker rod string and a sucker rod pump.
The machinery for beam pumping rocks back and forth is on the oil well’s surface. The apparatus is attached to a string of sucker rods that have been inserted deeply into the well’s borehole. The sucker rod string is connected to the sucker rod pump, which is afterward installed as a component of the tubing string close to the well’s bottom. The sucker rod pump forces oil from the reservoir up through the well to the surface while the beam pumping system shakes back and forth.
Hydraulic Pumping
In contrast to beam pumping, which uses sucker rods to move oil to the surface, this procedure uses equipment that uses a downhole hydraulic pump.
Openings for Artificial Lift Jobs in Canada
Amo Manager, Artificial Lift
AB, Leduc
Baker Hughes
Full-time
Presenting to senior leaders in specific technical spaces and on cross-functional teams on how technologies interconnect and contribute to the overall strategy.
Shipper and Receiver
Haliburton
Leduc, AB
Estimated at $31.6K-$40K a year
Under strict supervision, the Shipper/Receiver will perform general shipping and receiving duties but not limited to forklift operation.
Injection Molding Operator
ChampionX
Edmonton, AB
Estimated at $35k-&67k per year.
Full time.
Ability to lift lbs.
Able to lift, push, and pull up to 50 lbs.
Operate the mixing machine to blend plastic and other chemicals to a specific Consistency.
Production Engineer
ARC Resources Limited
Calgary, AB.
Estimated at $84.4k-107k a year
Permanent
Good knowledge and experience in designing different types of artificial lift systems.
Conclusion
Want to secure an artificial lift job in Canada? With this information, you can give it a go. See yu on the next one